Power-Off Warning Message: Enable - Confirmation at power off.
Disable - No confirmation at power off.
Resume on Alarm: Enable
Disable
Resume on Modem Activity: Enable
Disable
Lid Closed/Open: Rest/Resume - Goes into rest mode.
Beep/Normal - Beeps and stays on.
No Beep/Normal - Stays on.
Auto-Rest Timer: Disable
(AC Power/Battery) 1 minute increments from 1 to 180 min.
Auto-Standby Timer:
AC Power - Disable
1 minute increments from 1 to 180 min.
Battery - Disable
1 minute increments from 1 to 4 min.
Backlight Auto-Power-Off:
AC Power - Always ON
1 minute increments from 1 to 180 min.
Battery - Always ON
1 minute increments from 1 to 5 min.
HDD Auto-Power-Down:
AC Power - This setting is fixed at Always ON.
Battery - Always ON
60 second
5 second increments from 60 to 200 sec.
1 minute increments from 4 to 5 min.
Device Control Menu Options
Note
When changing the settings for the serial port and/or the parallel port, the user will be given the following warning:
Changing data of this field will cause a machine reboot at exit.
Do you want to continue?
The default is no, press the Spacebar then Enter to proceed with the changes.
Serial Port: Disable
Com1
Com2
Parallel Port: Disable
LPT1
LPT2
Internal Speaker Disable
Enable
Hard Disk Drive Capacity: Automatically detected by the system.
