|
|
| Battery | 3.5 Lithium |
| BIOS | 2 x 32KB, PACKARD BELL Packard Bell 3.80NP SETUP SETUP.COM program on disk |
| Cache | N/A |
| Clock/Driver | (RTC) |
| Cover Removal | 5 Screws at back panel |
| CPU | 80286-12 MHz 80286-16 MHz 80286-20 MHz Hardware Switchable: Turbo button toggles LED SPEED Green 12/16/20 MHz Amber 8 Mhz 80287-10 (optional/recommended) 80287-8 (not recommended) 80287-6 (not recommended) |
| Drive Cavities | 3 X 5 1/4" half-height (exposed) 1 X 5 1/4" half-height (enclosed) 1 X 3 1/2" vertical (exposed) |
| Front Panel | Lock : FLL PWR switch : FUR Turbo button : FLL PWR LED : FLL Turbo LED : FLL |
| Interfaces | Parallel : 1 x DB-25 f Serial : 2 x RS232 DB-9 m Game : (2 Ports) FDD Connector : 34-Pin on board |
| I/O Expansion Slots | 4 X 16-bit ISA2 X 8-bit ISA |
| Keyboard | 101 Key Enhanced , PS/2 |
| Network Cert. | N/A |
| Power Supply | 200 watts |
| RAM memory | Standard on motherboard : 2mb Maximum on motherboard : 8mb (use 256Kb,1MB 9-bit SIMMs,100ns) |
| Speaker | Cone on front chassis |
| Video | Video adapter on expansion slot |