1010 Motherboard Setup - Boot

Menu Item Options Description
Boot-time Diagnostic Screen Disabled
Enabled
Disables/enables the diagnostic screen during boot.
Quick Boot Mode Disabled
Enabled
Enables the system to boot without running certain POST tests.
Virus Check Reminder Disabled
Daily
Weekly
Monthly
Allows the user to select how often the BIOS issues a reminder to scan the system for viruses.
System Backup Reminder Disabled
Daily
Weekly
Monthly
Allows the user to select how often the BIOS issues a reminder to backup the system.
Fixed Disk Boot Sector Normal
Write Protect
Allows the user to write-protect the boot sector of the primary HDD.
After Power Failure Stay Off
Power On
Last State
Specifies the mode of operation if an AC/Power loss occurs.
Floppy Check Disabled
Enabled
When enabled, the BIOS verifies the floppy drive type on boot. Disabling this function allows for faster bootup.
On Modem Ring Power On
Stay Off
Specifies how the system responds to an incoming call on an installed modem when the power is off.
On LAN Power On
Stay Off
Specifies how the system responds to a LAN wakeup event when the power is off.
On PME Power On
Stay Off
Specifies how the system responds to a PME wakeup event when the power is off.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Fifth Boot Device
Removable Devices
Hard Drive
ATAPI CD-ROM Drive
Network Boot
Managed PC Boot
Specifies the boot sequence from the available devices. To specify boot sequence, select the boot device with the up/down arrow keys, and press "+" to move the device up the list or "-" to move the device down the list.
Hard Drive None Allows the user to set the sequence of hard drives or bootable add-in cards to be searched for an operating system on boot-up.
Removable Devices None Allows the user to set the sequence of removable drives to be searched for an operating system on boot-up.