1020 Motherboard Setup - Special Features

Menu Item Options Description
Chassis Fan Detected
Power Fan Detected
CPU Fan Detected
Voltage Detected
Disabled
Enabled
When enabled, the voltage chart for each enabled item will display during system boot-up.
Chassis Intrusion Detect Disabled
Enabled
Reset
When enabled, any intrusion on the system chassis will be recorded. On next boot-up, a message will be displayed. To clear this message, select the Reset option.
CPU Speed Disable
(Manual Settings)
When disabled, the CPU frequency and ratio will be auto-detected. When in Manual mode, CPU frequency can be set to 66, 68, 75, 83, 100, 103 or 112. Although 68, 75, 83, 103 and 112 frequencies are available, it is advised that these settings be used for testing only, since this may cause instability because the CPU is not designed for these frequencies. CPU ratio settings available are 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5 and 8
System Temperature Informational Only Displays the temperature inside the system case at the time the Setup utility was accessed.
CPU Temperature Informational Only Displays the temperature of the CPU at the time the Setup utility was accessed.
CPU Critical Temp. Disabled
50°C/122°F
53°C/127°F
56°C/133°F
60°C/140°F
63°C/145°F
66°C/151°F70°C/158°F
Used to set the critical temperature for the processor. When the CPU reaches the selected temperature, the load on the processor will be reduced.
Shutdown Temp. 80°C/176°F
85°C/185°F
90°C/194°F
Used to set the shutdown temperature for the processor. When the CPU reaches the selected temperature, the system will shut down. (This feature only works with a Windows® 95/98 operating system.)

Back to Main Setup Menu