|
|
| Menu Item | Options | Description |
|---|---|---|
| IDE HDD Block Mode | Enabled Disabled |
When enabled, this option allows Block Mode access for IDE hard drives. |
| IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO |
Auto Mode 0 - 4 |
When Auto is selected, the system BIOS will auto-detect the IDE HDD operation mode for PIO access. |
| IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Slave UDMA |
Auto Disabled |
When Auto is selected, the system BIOS will recognize and allow Ultra-DMA parameters for the specified drive. |
| On-Chip Primary PCI IDE On-Chip Secondary PCI IDE |
Enabled Disabled |
Enables/disables the onboard Primary/Secondary IDE control. |
| USB Keyboard Support | Disabled Enabled |
Disables/Enables support for a USB keyboard without a device driver. |
| Init Display First | PCI Slot AGP |
Allows the user to select whether the PCI slot VGA or the AGP slot VGA will function first. |
| Onboard Sound | Enabled Disabled |
Enables/disables the onboard audio controller. |
| Onboard LAN | Enabled Disabled |
Enables/disables the onboard LAN controller and RJ-45 port.. |
| Onboard FDC Controller | Enabled Disabled |
Enables/disables the onboard floppy disk controller. |
| Onboard Serial Port 1 Onboard Serial Port 2 |
Auto Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 3F8/IRQ10 2F8/IRQ11 3E8/IRQ10 2E8/IRQ11 |
Allows the user to select the I/O port and IRQ used for each Serial port. These parameters can also be set for automatic selection, or the port can be disabled. |
| Onboard Parallel Port | Disabled 3BC/IRQ7 (LPT0) 278/IRQ5 (LPT2) 378/IRQ7 (LPT1) |
Allows the user to disable the onboard parallel port, or set its IRQ and address. |
| Parallel Port Mode | Bi-direction EPP ECP ECP+EPP |
Allows the user to select the operational mode for the onboard parallel port. |