|
|
| Menu Item | Options | Description |
|---|---|---|
| Chassis Fan Detected Power Fan Detected CPU Fan Detected Voltage Detected |
Disabled Enabled |
When enabled, the voltage chart for each enabled item will display during system boot-up. |
| Disabled Enabled Reset |
When enabled, any intrusion on the system chassis will be recorded. On next boot-up, a message will be displayed. To clear this message, select the Reset option. | |
| CPU Speed | Disable |
When disabled, the CPU frequency and ratio will be auto-detected. When in Manual mode, CPU frequency can be set to 66, 68, 75, 83, 100, 103 or 112. Although 68, 75, 83, 103 and 112 frequencies are available, it is advised that these settings be used for testing only, since this may cause instability because the CPU is not designed for these frequencies. CPU ratio settings available are 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5 and 8 |
| System Temperature | Informational Only | Displays the temperature inside the system case at the time the Setup utility was accessed. |
| CPU Temperature | Informational Only | Displays the temperature of the CPU at the time the Setup utility was accessed. |
| CPU Critical Temp. | Disabled 50°C/122°F 53°C/127°F 56°C/133°F 60°C/140°F 63°C/145°F 66°C/151°F70°C/158°F |
Used to set the critical temperature for the processor. When the CPU reaches the selected temperature, the load on the processor will be reduced. |
| Shutdown Temp. | 80°C/176°F 85°C/185°F 90°C/194°F |
Used to set the shutdown temperature for the processor. When the CPU reaches the selected temperature, the system will shut down. (This feature only works with a Windows® 95/98 operating system.) |