|
|
Note |
| Press <F2> during post to get into setup. The following setup screens are samples only. |
Item |
Description |
| Summary Screen | This setting can disable or enable summary screen that is displayed after the POST beep. The summary screen contains basic system information from CMOS. |
| Boot Sequence | This setting determines the booting sequence for the system. The options for this setting is as follows: A: then C: C: then A: C: only |
| Setup Prompt | This setting enables or disables the 'Press F2 to enter SETUP' message. |
| POST Errors | This setting enables or disables POST error messages. |
| Floppy Check | This setting enables or disables the floppy drive check at POST. |