PB680 System Overview

Battery Socketed 3 volt Lithium coin cell battery at location BT5G1.
BIOS Flash EEPROM - AMI BIOS
Plug and Play 1.0a spec., support for Windows 95.
Bus Architecture PCI 2.1/ISA based system bus
66MHz maximum bus speed
Cache 16K level 1 cache
May have 256KB Pipelined Burst Cache soldered on board, not upgradable.
Chipset PC87306B Super I/O Controller.
CPU Pentium 75 MHz
Pentium 90 MHz
Pentium 100 MHz
Pentium 120 MHz
Pentium 133 MHz
Pentium 150 MHz
Pentium 166 MHz
Pentium 200 MHz
Uses Type 7 Zero Insertion Force (ZIF) CPU Socket.
Supports Pentium Overdrive.
Interfaces Serial DB-9 Serial port for COM2
Parallel DB-25 Parallel port
Keyboard PS/2 keyboard port
Mouse PS/2 mouse port
S-Video I2C and S-video IN
USB Side-by side USB connector
(USB not available on all PB680 motherboards)
RCA RCA Jack for NTSC/Pal video IN
VGA DB-15 VGA port
FDD Connector 34-pin on-board header connector
HDD Connector 40-pin PCI IDE (fast PIO-4)
HDD Connector 40-pin PCI IDE (fast PIO-4)
VESA Feature Connector 34-pin header connector
Network Certification To be determined.
RAM 8MB installed standard/128M maximum
Uses 4/8/16/32 MB 72-pin SIMMs, ó0 or 70ns, EDO or Fast Page RAM
Supports only non-parity DRAM
Speaker On-board piezo speaker.
UART Two 16C550A Compatible chips
Video Built-in, S3 Trio64V+ or S3 Virge 3D
PCI graphics controller:
1024 x 768, 256 colors with 1MB
1280 x 1024, 256 colors with 2MB
VESA Display Channel supported
DPMS compliant
Note The PB680 uses S3 Inc. Trio64V+ or S3 Virge 3D PCI Video Chipset.
The S3 Trio64V+ and S3 Virge are compatible with IBM VGA standards.
Video RAM S3 Trio64V+ motherboards have 1MB expandable to 2MB
S3 Virge 3D motherboards have 2MB Non Upgradable