|
|
| Connector | Description |
|---|---|
| J1 | Not Installed/AMC/VFC |
| J2 | Fan Power |
| J3 | Video Out |
| J4 | Not Installed |
| J5 | Not Installed |
| J6 | USB Out |
| J7 | Mouse |
| J8 | Keyboard |
| J9 | Riser Slot (PCI) |
| J10 | Printer Out |
| J11 | Game Port |
| J12 | Secondary IDE |
| J13 | Primary IDE |
| J14 | Modem Header |
| J15 | Audio Out |
| J16 | Not Installed/Spare GP10 |
| J17 | COM 2 Serial Port |
| J18 | Front Panel Connector |
| J19 | Power Connector |
| J20 | Battery Jumper |
| J21 | Floppy Drive Connector |
| J22 | Not Installed/Power |
| J23 | CPU Fan Power |
| JP9 | Mike and Headphone |
| JP11 | Modem Audio,CD In |
J3 VGA Video Port
A female DB15 connector built-in on the motherboard.
J10 Parallel Port
A female DB25 connector built-in on the motherboard.
Serial Port
A male DB9 connector built-in on the motherboard.
J7 Mouse Port
A female 6-pin mini DIN connector built-in on the motherboard.
J8 Keyboard Port
A female 6-pin mini DIN connector built-in on the motherboard.
Video Chip
The U13 video controller is soldered onto the motherboard.
The on board video controller cannot be disabled.
See Also:Video Upgrade Information
Video Feature Connector
The connector is a male 2 x 17-pin VESA feature connector allowing video to be routed through a video capture card.
Floppy Drive Interface
The connector is a male 2 x 17-pin floppy drive connector.
Primary Hard Drive Interface
This male 2 x 20-pin connector is the primary IDE interface.
Secondary Hard Drive Interface
This male 2 x 20-pin connector is the secondary IDE interface.
Battery
This 3V Lithium battery.
Connector J23 CPU Fan Power In
J2 is a 3-pin connector with the following pin designations:
| Pin # | Signal |
|---|---|
| 1. | Negative |
| 2. | Positive |
| 3. | No connection |
The power supply provided with these systems has a two prong connector designed for this connector.
The connector is keyed so that the power cable can not be connected here improperly. The function of this connector is to receive 5 volts from the power supply for use by the CPU fan. The CPU fan connects to J2 receives the 5 volts
from the power cable connected to J23.
Connector J2 CPU Fan Power Out
J2 is a 3-pin connector with the following pin designations.
| Pin # | Signal |
|---|---|
| 1. | Negative (black) |
| 2. | Positive (red) |
| 3. | No connection |
J6
USB Connector (Universal Serial Bus)
Speaker
On-board piezo speaker.