WARNING: This information is provided "as is" with no warranty. Use at your own risk!
This site is NOT affiliated with PB.

870 Motherboard BIOS Upgrade

1. The BIOS can be updated from a file.
2. The current BIOS code can be copied from the Flash EPROM to a disk file as a backup.
3. The current BIOS can be compared with a file on the disk.

1. Insert the BIOS update diskette and re-boot the system.
2. When the "Flash Memory Update Utility" message appears, press Enter to start the program.
3. Select the "Update FLASH Memory Area from a File" option, then press Enter.
4. Select the "Update System BIOS" option, press Enter.
5. Select the appropriate filename of the update BIOS file, press Enter.
6. Press Enter at the following screen to proceed with programming.
7. The BIOS is now re-programmed with the updated BIOS file. Now remove the
8. diskette, and press Enter to reboot the computer system.
9. Complete the upgrade process by running the CMOS Setup program. Enter the appropriate system information, as all previous information has been erased.