Item | Description | Item | Description | |
---|---|---|---|---|
A | PCI Slots | Q | SMC FDC37M707QFP I/O Controller | |
B | ATAPI CD-ROM Connector | R | Piezo Speaker | |
C | Optional Line-In Connector | S | FDD Connector | |
D | Telephony Connector | T | Primary IDE Connector | |
E | Rear Ports | U | Secondary IDE Connector | |
F | Optional Fan 1 Connector | V | Configuration Jumper Block (J8E1) | |
G | CPU Slot1 Connector | W | Front Panel Connectors | |
H | Fan 2 Connector | X | i82371EB PIIX4E Chipset | |
J | i82443EX PCI/AGP Controller (PAC) Chipset | Y | Flash BIOS | |
K | Fan 3 Connector | Z | Yamaha YMF 740-V AC '97 Digital Controller | |
L | DIMM Sockets | AA | Battery | |
M | Power Supply Connector | BB | Optional Wake-on-Ring Connector | |
N | ATI Rage Pro Turbo AGP Graphics Controller | CC | ISA Slot | |
P | Video RAM |
Rear Ports
Front Panel Connectors (J10D1)
Pin # | Signal Name | Description | Pin # | Signal Name | Description | |
---|---|---|---|---|---|---|
1 | HD_PWR | Hard disk LED Pullup to +5V | 2 | HDR_BLNK_GRN | Front panel green LED | |
3 | HAD# | HDD active LED | 4 | HDR_BLNK_YEL | Front panel yellow LED | |
5 | GND | Ground | 6 | SW_ON# | Front panel On/Off button | |
7 | FP_RESET# | Front panel Reset button | 8 | GND | Ground | |
9 | +5V | Supply voltage | 10 | FPSLP# | Front panel Sleep button | |
11 | IRRX | IrDA serial input | 12 | GND | Ground | |
13 | GND | Ground | 14 | (Pin removed) | No connection | |
15 | IRTX | IrDA serial output | 16 | +5V | IR power | |
17 | N/C | Not connected | 18 | N/C | Not connected |
Jumpers
Function | Jumper J8E1 | Configuration |
---|---|---|
Normal | The BIOS uses current configuration information and passwords for booting. | |
Configure | After POST, CMOS Setup runs automatically. The maintenance menu is displayed. | |
Recovery | The BIOS attempts to recover the BIOS information. A recovery diskette is required. |
Note
Pin 1 of the configuration jumper block is indicated on the motherboard by a small, white triangle.