WARNING: This information is provided "as is" with no warranty. Use at your own risk!
This site is NOT affiliated with PB.

880 Setup - Peripheral Configuration

Menu Item Options Description
Serial port A
Serial port B
Enabled
Disabled
Auto
Allows to user to configure the serial port(s).
Base I/O address 3F8
2F8
3E8
2E8
Specifies the base I/O address for the serial port(s).
Interrupt IRQ 3
IRQ 4
Specifies the interrupt for the serial port(s).
Parallel port Enabled
Disabled
Auto
Allows to user to configure the parallel port.
Mode Bi-directional
Output Only
EPP
ECP
Selects the operational mode for the parallel port.
Base I/O address 378
278
228
Specifies the base I/O address for the parallel port.
Interrupt IRQ 5
IRQ 7
Specifies the interrupt for the parallel port.
Audio Enabled
Disabled
Enables/disabled the on-board audio subsystem.
Legacy USB Support Disabled
Enabled
Disables/enables legacy USB support.