|
|
| Menu Item | Options | Description |
|---|---|---|
| Power Management/APM | Enabled Disabled |
Enables/disables Power Management functions |
| Video Power Down Mode | Suspend Standby Disabled |
Specifies the mode to place the monitor when entering the low power state. |
| Hard Disk Power Down Mode | Suspend Standby Disabled |
Specifies the mode to place the hard drive(s) when entering the low power state. |
| Standby Time Out (Minutes) | Disabled 1 2 4 8 10 20 30 40 50 60 |
Specifies the amount of inactive time before the computer enters standby mode. |
| Suspend Time Out (Minutes) | Disabled 1 2 4 8 10 20 30 40 50 60 |
Specifies the amount of inactive time before the computer enters suspend mode. |
| Power Button Function | Informational | Displays the function of the system's power button. |
| Restore on AC/Power Loss | Stay Off Power On Last State |
Instructs the BIOS as to what action should be taken upon the restoration of AC power following a power loss to the system. |
| Ring Resume From Soft Off | Disabled Enabled |
Determines the action of the system when power is off and the modem rings. |
| LAN Resume From Soft Off | Disabled Enabled |
Determines the action of the system when power is off and a LAN wake-up event occurs. |
| Disabled Enabled |
Disables/enables RTC Alarm Resume | |
| RTC Alarm Date | Sets the RTC Alarm Date. | |
| RTC Alarm Hour | (User Defined) | Sets the RTC Alarm Hour |
| RTC Alarm Minute | (User Defined) | Sets the RTC Alarm Minute |
| RTC Alarm Second | (User Defined) | Sets the RTC Alarm Second |