980 Motherboard Setup - Peripheral Setup

Main Menu

Menu Item	Options	Description
OnBoard FDC	Disabled Enabled	Enables/disables the on-board Floppy Disk Controller.
OnBoard Serial Port 1 OnBoard Serial Port 2	Auto Disabled 3F8h/IRQ4 2F8h/IRQ3 3E8h/IRQ4 2E8h/IRQ3	Enables/Disables/Selects the address for the on-board serial ports.
OnBoard Parallel Port	Auto Disabled 378h/IRQ7 278h/IRQ5	Enables/Disables/Selects the address for the on-board parallel port.
Parallel Port Mode	Output Only Bi-dir./EPP ECP	Selects the operating mode for the on-board parallel port.
Parallel Port DMA Channel	1 or 3	Indicates the Direct Memory Access Channel utilized by the Parallel Port (Only available in ECP Mode).
OnBoard PCI IDE	Both Primary Secondary Disabled	Enables/disables one or both on-board IDE connectors.
OnBoard Sound Card	Enabled Disabled	Enables/disables the onboard audio component.
Hard Disk Pre-Delay	3 sec. 6 sec. 9 sec. 12 sec. 15 sec. 21 sec. 30 sec.	Sets the hard disk predelay time, allowing the hard drive(s) to spin up prior to being accessed by CMOS.
Floppy Write Protect	Disabled Enabled	Disables/enables write protection for the onboard Floppy Disk Controller
USB K/B and Mouse Legacy Support	Disabled Enabled	Enables/disables use of a USB keyboard and mouse.

Main Menu