|
|
| Menu Item | Options | Description |
|---|---|---|
| Power Management/APM | Enabled Disabled |
Enables/disables Power Management functions |
| Video Power Down Mode | Suspend Standby Disabled |
Specifies the mode to place the monitor when entering the low power state. |
| Hard Disk Time Out (Minutes) | Disabled 1-15 |
Specifies the amount of inactive time before the computer enters standby mode. |
| Suspend Time Out (Minutes) | Disabled 1 2 3 4 5 10 20 30 40 50 60 |
Specifies the amount of inactive time before the computer enters suspend mode. |
| Modem Use IRQ | N/A 3 4 5 7 9 10 11 |
Allows the user to select which interrupt is to be used by the modem. NA should be selected if there is no modem installed. |
| Power Button Function | Informational | Indicates the function of the Power button. |
| Wake On Ring | Disabled Enabled |
Determines the action of the system when power is off and the modem rings. |
| Wake On LAN | Disabled Enabled |
Determines the action of the system when power is off and a LAN wake-up event occurs. |
| Wake On RTC | Disabled Enabled |
Disables/enables wake function activated by a signal from the Real-Time Clock. When enabled, the user can manually input the time (hh:mm:ss) that the system should awaken from suspend mode. |
| RTC Alarm Date | When enabled, 1-31, or Every Day |
When enabled, awaken date. |
| RTC Alarm Hour | When enabled, 00-23 |
When enabled, awaken hour. |
| RTC Alarm Minute | When enabled, 00-59 |
When enabled, awaken minute. |