WARNING: This information is provided "as is" with no warranty. Use at your own risk!
This site is NOT affiliated with PB.

Sound II 144 AM/SP Setup

Sound II 144 AM/SP Jumpers

• The internal connectors on the Sound 144AM/SP are color coded for easier identification.
• If an external device is connected to the LINEOUT, MIC, or LINEIN on the back of the sound card, the internal connector for that port will be disabled.
• *Indicates default settings.

Description	Jumpers	Jumper Setting
JX1	*1-2	Condenser Microphone
Mic Connect	2-3	Carbon Microphone
MODEMIRQ	2/3/*4/5	Interrupt used
JMPCFG	*1-2 2-3	*Use EEPROM Settings Ignore EEPROM Settings
JMPBO	*1-2 2-3	*Use I/O Port 220H-22FH Use I/O Port 240H-24FH

Sound II 144 AM/SP Connectors

Connector	Description
CDAUDIO	CD Audio Connectors / White
CDAUDIO2	/ Red
TVAUDIO	TV Audio in Connector / Black
RADIO	RADIO Audio in Connector / Blue
MIC1	Microphone Connector / White
LOUT1	Line out Connector / White
MIDI/JOY	MIDI or Joystick Interface
TEL	Telephone Connector
LINEOUT	Line out Connector
MIC	Microphone Connector
LINEIN	Line in Connector
RING	Green PC Telephone Ring Detection Connector