WARNING: This information is provided "as is" with no warranty. Use at your own risk!
This site is NOT affiliated with PB.

Sound 4:V.90 Upgrade Fails

Symptom
After Upgrading to V.90, the modem may not function correctly.
Symptoms may be error messages such as:cannot open port, and no modem detected.

Resolution
Right-click on My Computer, click - Properties
Click on the Device Manager tab
Locate Unknown Devices and click on the plus
Highlight AZT 3011 Device and then Click - Remove
Click on ‘OK’ when warned about removing the device from the system
Click on Start – Shutdown – Restart
Upon restarting Windows the system will detect the AZT3011 device and ask for the drivers
Click on Browse, Make sure it is searching the C: drive
Locate the Aztech_V90 folder and double-click, click on ‘OK’ and click ‘OK’ again when prompted
When the drivers are loaded, the system will continue into windows
Click Start – Shutdown- Restart