1030 Motherboard Setup - Standard


Main Menu
Menu Item Options Description
Date MM/DD/YYYY Allows the user to manually set the system date.
Time HH/MM/SS Allows the user to manually set the system time.
Primary Master
Primary Slave
Secondary Master
Secondary Slave		 Auto
User
None		 Auto causes the BIOS to detect drive parameters at each boot.
User prompts the user to fill in drive parameters manually.
None indicates that no drive is attached.
Drive A:
Drive B:		 360KB 51/4"
1.2MB 51/4"
720KB 31/2"
1.44MB 31/2"
2.88MB 31/2"
None		 Allows the user to set the drive size and type for floppy drives.

Note
This motherboard has been shipped in system incorporating an LS-120 drive. When this drive is present, Drive A: should be selected as None, as illustrated. The factory default setting for this drive is 1.44MB 31/2".
Floppy 3 Mode Support Disabled
Drive A		 Disables/enables Floppy 3 Mode (2.88MB 31/2") support.
Summary Screen On
Off		 Enables/disables the bootup summary screen.
PNP OS Installed No
Yes		 Indicates whether or not a Plug & Play operating system is in use.
Boot Sequence Allows the user to select the order in which the system searches drives for bootable media.
BIOS Version Informational Only
Main Processor Informational Only Displays the type of processor detected by the BIOS during bootup.
Processor Speed Informational Only Displays the detected speed of the installed processor.
Cache RAM Informational Only Displays the amount of cache RAM detected by the BIOS during bootup.
Total Memory Informational Only Displays the total amount of memory detected by the BIOS during bootup.