WARNING: This information is provided "as is" with no warranty. Use at your own risk!
This site is NOT affiliated with PB.

Sound 144 AM/SP Setup

Sound 144 AM/SP Software Setup

Sound 144 AM/SP Jumpers

Description	Jumpers	Jumper Setting
JX1	*1-2	Condenser Microphone
Mic Connect	2-3	Carbon Microphone
MODEMIRQ	2/3/ *4/5	Interrupt used
JMPCFG	*1-2 2-3	*Use EEPROM Settings Ignore EEPROM Settings
JMPBO	*1-2 2-3	Use I/O Port 220H-22FH Use I/O Port 240H-24FH
Modem Com Port	JM1 *1-2 2-3 1-2 2-3 JM2 *1-2 1-2 2-3 2-3	COM Port Used *COM 1 Used COM 2 Used COM 3 Used COM 4 Used

Note
* Indicates default settings.

Sound 144 AM/SP Connectors

1. The internal connectors on the Sound 144AM/SP are color coded for easier identification.
2. If an external device is connected to the LINEOUT, MIC, or LINEIN on the back of the sound card, the internal connector for that port will be disabled.

Connector	Description
PAN	Panasonic CD-ROM Interface
CDAUDIO	CD Audio Connectors / White
CDAUDIO2	/ Red
TVAUDIO	TV Audio in Connector / Black
RADIO	RADIO Audio in Connector / Blue
MIC1	Microphone Connector / White
LOUT1	Line out Connector / White
MIDI/JOY	MIDI or Joystick Interface
TEL	Telephone Connector
LINEOUT	Line out Connector
MIC	Microphone Connector
LINEIN	Line in Connector
RING	Green PC Telephone Ring Detection Connector